Welcome to our online shop!

Wave Makers & Controllers

17 Item(s)

List  Grid 

Set Descending Direction
  1. 1 Inch (25mm)Enductor Out Flow System

    Accelerate the water flow speed to increase the water flow in aquariums Learn More
    $13.50

  2. 1 Inch Return Female Spinning Wave outlet Out Flow System

    1 Inch Return Female Spinning Wave outlet Out Flow System Learn More
    $13.50

  3. 1" 25mm Inch Return Male Spinning Wave outlet Out Flow System

    One Inch Return Male Spinning Wave outlet Out Flow System Learn More
    $13.50

  4. 1/2 Inch (15mm) Duck-billed Enductor Out Flow System

    Accelerate the water flow speed to increase the water flow in aquariums Learn More
    $13.50

  5. 1/2 Inch Enductor Out Flow System

    Accelerate the water flow speed to increase the water flow in aquariums. Learn More
    $13.50

  6. 3/4 Inch (20mm) Duck-billed Enductor Out Flow System

    Accelerate the water flow speed to increase the water flow in aquariums Learn More
    $13.50

  7. 3/4 Inch Enductor Out Flow System

    3/4 Inch Water Flow Accelerator Accelerate the water flow speed to increase the water flow in aquariums Adjustable flow direction Extendable in length Learn More
    $13.50

  8. EHEIM StreamON+ 2000 Water Circulating Pump

    With EHEIM streamON+ you have more flexibility than with any other streaming pumps.

    Our new streamON+ streaming pumps are suitable for use in both marine and in fresh water aquariums. They are small, highly efficient and energy saving. You can position them vertically or horizontally and turn them up to 180°. This allows you to turn them in any direction (3D function). 

    There are two versions to choose from: The more convenient has a magnet bracket and is therefore easier to align against the glass. Also the outflow can be smoothly adjusted in small increments.

    Benefits of the EHEIM streaming pumps streamON+

    • Compact streaming pumps for aquariums from 35 to 500 l.
    • Suitable for both marine and fresh water
    • Optimum water circulation with a natural, smooth current formation
    • Increase of oxygen content and creation of nature like living conditions
    • Vital for corals in marine water; beneficial for fish in fresh water
    • Flexible positioning – horizontal or vertical
    • Swivelable up to 180° (3D adjustable)
    • Fixing with magnet bracket for glass thickness 3 – 8 mm and 6 - 12 mm 
    • Outflow adjustable in small increments 
    • Extremely quiet and very low maintenance
    • High efficiency with low energy use
    • Utmost safety and reliability 
    Learn More
    $90.11

  9. EHEIM StreamON+ 4000 Water Circulating Pump

    With EHEIM streamON+ you have more flexibility than with any other streaming pumps.

    Our new streamON+ streaming pumps are suitable for use in both marine and in fresh water aquariums. They are small, highly efficient and energy saving. You can position them vertically or horizontally and turn them up to 180°. This allows you to turn them in any direction (3D function). 

    There are two versions to choose from: The more convenient has a magnet bracket and is therefore easier to align against the glass. Also the outflow can be smoothly adjusted in small increments.

    Benefits of the EHEIM streaming pumps streamON+

    • Compact streaming pumps for aquariums from 35 to 500 l.
    • Suitable for both marine and fresh water
    • Optimum water circulation with a natural, smooth current formation
    • Increase of oxygen content and creation of nature like living conditions
    • Vital for corals in marine water; beneficial for fish in fresh water
    • Flexible positioning – horizontal or vertical
    • Swivelable up to 180° (3D adjustable)
    • Fixing with magnet bracket for glass thickness 3 – 8 mm and 6 - 12 mm 
    • Outflow adjustable in small increments 
    • Extremely quiet and very low maintenance
    • High efficiency with low energy use
    • Utmost safety and reliability 
    Learn More
    $114.60

  10. EHEIM StreamON+ 5000 Water Circulating Pump

    With EHEIM streamON+ you have more flexibility than with any other streaming pumps.

    Our new streamON+ streaming pumps are suitable for use in both marine and in fresh water aquariums. They are small, highly efficient and energy saving. You can position them vertically or horizontally and turn them up to 180°. This allows you to turn them in any direction (3D function). 

    There are two versions to choose from: The more convenient has a magnet bracket and is therefore easier to align against the glass. Also the outflow can be smoothly adjusted in small increments.

    Benefits of the EHEIM streaming pumps streamON+

    • Compact streaming pumps for aquariums from 35 to 500 l.
    • Suitable for both marine and fresh water
    • Optimum water circulation with a natural, smooth current formation
    • Increase of oxygen content and creation of nature like living conditions
    • Vital for corals in marine water; beneficial for fish in fresh water
    • Flexible positioning – horizontal or vertical
    • Swivelable up to 180° (3D adjustable)
    • Fixing with magnet bracket for glass thickness 3 – 8 mm and 6 - 12 mm 
    • Outflow adjustable in small increments 
    • Extremely quiet and very low maintenance
    • High efficiency with low energy use
    • Utmost safety and reliability 
    Learn More
    $140.00

  11. NEMPROTECT POWERHEAD GUARD FOR Gyre Maxspect XF130/230

    NEMPROTECT POWERHEAD GUARD FOR Gyre Maxspect XF130/230

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Gyre Maxspect XF130/230 pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the Gyre and stays put via friction fit. The front of the cover comes off, facilitating maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance

    Material: 3D printed from reef-safe PETG plastic

    What’s Included?

    1x NemProtect anemone guard for Maxspect XF130 / 230

    Learn More
    $111.17

  12. NEMPROTECT POWERHEAD GUARD FOR Gyre Maxspect XF150/250

    NEMPROTECT POWERHEAD GUARD FOR Gyre Maxspect XF150/250

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Gyre Maxspect XF150/250 pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the Gyre and stays put via friction fit. The front of the cover comes off, facilitating maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance

    Material: 3D printed from reef-safe PETG plastic

    What’s Included?

    1x NemProtect anemone guard for Maxspect XF150 / 250

    Learn More
    $131.38

  13. NEMPROTECT POWERHEAD GUARD FOR Jebao OW-10

    NEMPROTECT POWERHEAD GUARD FOR Jebao OW-10

     

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Jebao OW-10 pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Jebao OW pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance

    What’s Included?

    1x NemProtect anemone guard for Jebao OW-10

    Learn More
    $60.60

  14. NEMPROTECT POWERHEAD GUARD FOR Jebao OW-25

    NEMPROTECT POWERHEAD GUARD FOR Jebao OW-25

     

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Jebao OW-25 pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Jebao OW pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance

    What’s Included?

    1x NemProtect anemone guard for Jebao OW-25

    Learn More
    $70.75

  15. NEMPROTECT POWERHEAD GUARD FOR VORTECH MP10

    NEMPROTECT POWERHEAD GUARD FOR VORTECH MP10

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Ecotech Vortech pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Vortech pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance
    Learn More
    $50.55

  16. NEMPROTECT POWERHEAD GUARD FOR VORTECH MP40

    NEMPROTECT POWERHEAD GUARD FOR VORTECH MP40

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Ecotech Vortech pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Vortech pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance
    Learn More
    $60.63

  17. NEMPROTECT POWERHEAD GUARD FOR VORTECH MP60

    NEMPROTECT POWERHEAD GUARD FOR VORTECH MP60

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Ecotech Vortech pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Vortech pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance
    Learn More
    $70.75

17 Item(s)

List  Grid 

Set Descending Direction