Welcome to our online shop!

Aquaforest

Items 1 to 20 of 36 total

Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. AquaForest CA Plus 150ml

    Component designed for supplementing iodine and fluorine in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $8.65

  2. AquaForest CA Plus 2000ml

    Component designed for supplementing iodine and fluorine in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $34.05

  3. AquaForest Carbon 5L

    High quality granulated active carbon. Eliminates undesirable chemical compounds in marine and freshwater aquariums. Carbon should be placed in flow filters in 100 ml for 100 l (27 US gal.) of water in marine aquarium or 200 l (54 US gal.)in freshwater aquarium.

    Recommended flow is maximum 500l/h through the media.

    The insert should be replaced every 4 weeks.

    Learn More
    $79.98

  4. AquaForest Components Strong ABCK 50ml

    Solution increasing temporary hardness level in marine aquariums. Application: 10ml of the solution increases KH level of 0,5°dKH in 100l of water. Maximum daily dosage is 20ml in 100l of water. Temporary hardness level in reef aquarium should be kept at around 6,5° – 8,0°dKH
    US: 2 tsp of the solution increases KH level of 0.5dKH in 27 US gal. of water. Maximum daily dosage is 4 tsp in 27 US gal. of water.

    Learn More
    $33.36

  5. AquaForest KH Plus 150ml

    Solution increasing temporary hardness level in marine aquariums. Application: 10ml of the solution increases KH level of 0,5°dKH in 100l of water. Maximum daily dosage is 20ml in 100l of water. Temporary hardness level in reef aquarium should be kept at around 6,5° – 8,0°dKH
    US: 2 tsp of the solution increases KH level of 0.5dKH in 27 US gal. of water. Maximum daily dosage is 4 tsp in 27 US gal. of water.

    Learn More
    $9.79

  6. AquaForest MG Plus 150ml

    Solution increasing magnesium level in marine aquariums. Application: 10ml of the solution increases Mg level of 5mg/l in 100l (27 US gal.) of water. Maximum daily dosage is 20ml in 100l of water. Magnesium level in reef aquarium should be kept at around 1300mg/l.

    Learn More
    $8.65

  7. AquaForest MG Plus 2000ml

    Solution increasing magnesium level in marine aquariums. Application: 10ml of the solution increases Mg level of 5mg/l in 100l (27 US gal.) of water. Maximum daily dosage is 20ml in 100l of water. Magnesium level in reef aquarium should be kept at around 1300mg/l.

    Learn More
    $34.05

  8. AquaForest AF Frag Rocks 24pcs

    AquaForest AF Frag Rocks 24pcs

    High quality and biology neutral rocks designed to easy fragging. Our artificial rocks resemble natural live rock and unlike ceramic rocks, they are made of light materials and have high porosity. They are a perfect filtration medium and a perfect habitat for a number of beneficial microorganisms. With Aquaforest rocks aqua-scaping is easy, as they can be quickly cut, arranged and attached, and they are available in a variety of shapes.

    Learn More
    $12.50

  9. AquaForest AF Poly Glue 600g

    Polymer adhesive for corals.
    Usage: Glue granules should be placed in hot water (about 60ºC/ 140ºF); after a few minutes easily forming mass will create, which has the best adhesive properties. The adhesive will become completely solid when placed in the aquarium. We recommend that gluing process is performed out of the water. Coral can be placed in the water 30 seconds after bonding. Unused mass can be used again. Biodegradable product.

    Learn More
    $29.99

  10. AquaForest AF Protect Dip 50ml

    AquaForest AF Protect Dip 50ml
    A disinfecting solution for bathing corals. Thoroughly cleanses the surface of coral. Reduces the risk of developing many diseases, examples: tissue necrosis, coral bleaching, mycosis, AEFW or Brown Jelly Syndrome. The formula is perfect for introducing new corals into the tank and for quarantine. The bathing process ensures healthy appearance, growth and development of corals. In addition, the solution is safe for corals, contains no iodine or oxidizing compounds.

    Usage:
    Carry out the bath out of the tank. Shake before use. Dissolve 2.5 ml AF Protect Dip in 5 litres of saltwater or water taken directly from the tank. Immerse the coral in the prepared solution and gently clean its surface by rinsing with water or using a toothbrush. The bath should take up to 5 minutes. To rinse, transfer the coral into a container filled with clean saltwater. Transfer the cleaned coral back into the tank. Once used, the solution may not be reused. Do not pour the solution into the aquarium. Do not use the product if fish, snails, mussels, crabs or shrimp are in the tank. Use only out of the tank. Not suitable for human consumption.

    Learn More
    $32.55

  11. AquaForest AFix Glue 110gr

    Special plastic two-component mass for joining small rocks and attaching stony corals to rocks. It does not cause water impurity and is not toxic for reef animals. Both components should be mixed in equal amounts
    outside the aquarium and then used within 30min.

    Learn More
    $15.88

  12. AquaForest Component A 2000ml

    Component designed for supplementing strontium and barium in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US:19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $34.05

  13. AquaForest Component B 150ml

    Component designed for supplementing heavy metals (cobalt, copper, chromium, manganese, vanadium, zinc, nickel, iron) in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $8.65

  14. AquaForest Component B 2000ml

    Component designed for supplementing heavy metals (cobalt, copper, chromium, manganese, vanadium, zinc, nickel, iron) in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $34.05

  15. AquaForest Component C 150ml

    Component designed for supplementing iodine and fluorine in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $8.65

  16. AquaForest Component C 2000ml

    Component designed for supplementing iodine and fluorine in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $34.05

  17. AquaForest Demineralization Resin 1000ml

    AquaForest Demineralization Resin

    High quality Demineralization Resin – designed for water demineralization, used in RO filters mainly as the last stage of tap water purification.

    Learn More
    $34.89

  18. AquaForest Fluorine 10ml

    Supplement contains concentrated iodine and fluorine – one of the main micronutrients in sea water. Fluorine is taking part in calcification process by increasing strength of skeleton and has impact for coral branching. Fluorine intensifies blue and white colour of stony corals.

    Dosage: 1 drop per 100l(27 US gal.) daily.

    Capacity: bottle of 10ml( 0.35 fl.oz.), 50ml( 1.7 fl.oz.).

    1ml Fluorine (~ 15 drops) rise Fluorine level per 0,06 ppm in 100L (27 US gal)

    Learn More
    $8.65

  19. AquaForest Fluorine 50ml

    Supplement contains concentrated iodine and fluorine – one of the main micronutrients in sea water. Fluorine is taking part in calcification process by increasing strength of skeleton and has impact for coral branching. Fluorine intensifies blue and white colour of stony corals.

    Dosage: 1 drop per 100l(27 US gal.) daily.

    Capacity: bottle of 10ml( 0.35 fl.oz.), 50ml( 1.7 fl.oz.).

    1ml Fluorine (~ 15 drops) rise Fluorine level per 0,06 ppm in 100L (27 US gal)

    Learn More
    $22.36

  20. AquaForest Gel Fix 50ml

    AquaForest Gel Fix 50ml 

    AF Gel Fix is a fast and long-lasting gel that glues coral cuttings. AF Gel Fix is designed for precise gluing of small elements. Due to the density of AF Gel Fix, it makes sticking coral frags to rock or plugs easy and effortless. The gel does not contain toxins that are dangerous to sea life. The glue can be used in or outside the tank. Bonds in 10 seconds.

    How to use

    Shake before use. Apply small amount of AF Gel Fix to the surface to which you want to stick the frag and immediately stick it to the designated place. Let it dry for 3 minutes. After indicated time you can place the coral frag in the tank.

    Learn More
    $24.81

Items 1 to 20 of 36 total

Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction